Choose from Auto, PAP, and CHAP and then input your username and password. Turning off Load Balance for an active WAN interface may require the user to restart any current browsing session.Enabled: Selected by default. Show panel on Air Manager boot Check this to make the selected panel start automatically when Air Manager has booted, uncheck to turn it off. Updates and activation methods vary by modem model and service provider.
Delete an instrument Not satisfied with your creation or whatever: select the instrument you want to delete and hit the ‘Delete’ button or press the delete-key on your keyboard. This could be a name or number/letter combination.)IP AddressGatewayNetmaskStats: bytes in, bytes outUptimeClick “Edit” to view configuration options for the selected device. The router may start another modem as a failover measure. Note: This only works with the instruments that come with Air Manager, not with instruments you’ve created yourself, as only the layout configuration is send and not the instruments. Place a check mark with the aircraft you would like the panel to start automatically. Tab: Settings Settings Change all Air Manager settings from this tab. On the top you see two buttons: ‘Clear Cache’ : Pressing the Clear Cache button deletes all the cache.
Cache is used to store (OSM) map data and data from the instrument store. Ribbon menu: Test Run Select the instrument you want to test and click ‘Run’. When the instrument is running, click Run again to reload. Automatically check for new firmware: (Default: selected) The modem will automatically check for firmware updates by default. Submit Panel If you think that your panel is absolutely fabulous, and you want to share this joy with us, then select the panel and press the ‘Submit Panel’ button. Deselect to disable an interface.Click on the small box at the top of the list to select/deselect all devices for either Load Balance or Enabled. This means that you cannot move the instruments.